Participate in our Data and Recharge Card Giveaway

T-code T300 Auto Key Programmer – Newest Version V16.8 for Multi-Brand Cars

72,900.00

In stock

Compare
Category:

Product Description
T300 T-code Automan Auto Key Programmer (No token needed)
Version: Latest Version V16.8
Functions:
SBB Key Programmer and T300 Key Programmer can do Anti-theft matching. Copy car key without the
original key, but need the password.(you can calculate the password by some software);
AD900 key programmer and ZED Bull Key Programmer can do car key matching. Copy car key without
password, but need the original key.
T-code T300 Models coverage:
for Acura, for Audi, for Alfa, for Chevrolet, for Citroen, for Daewoo, for Fiat, for G/M, for Honda, for Hyundai, for Isuzu, for Infiniti, for Jaguar, for Kia, for Land Rover, for Lancia, for Lexus, for Lincoln, for Mazda Japan, for Mazda USA, for Mercury, for Mitsubishi, for Nissan, for Peugeot, for Renault, for Rover, for Seat, for Skoda, for Suzuki, for Toyota Japan, for Toyota USA, for Volkswagen and for VW/ for Audi (Pin code reading) .
Function introduces of T300 chip key decoder:
Use for key programming. Supporting More cars than any other transponder machine .
1. Read the vehicle malfunction code
2. Clear the vehicle malfunction code
3. Read the system data stream
4. Read IMM0/ECU ID
5. Fetch the machinery key code
6. Clear vehicle key memory
7. Program new key
8. Read vehicle key login password
9. Distinguish types of ECU
10. ECU-IMMOBILISER programme
11. Read EKA password
12. Programme new EKA password
13. Programme telecontrol implement
Install Steps:
VW Transponder key matching with 5 digits Login Code
Procedure for adding transponder keys to vehicles with separate Immobilizer box:
(Golf 3, Passat B4, Transporter, Lupo, Sharan)
1) Switch ignition ON with new key.
2) Select: Immobilizer -> Login: Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code). For example, if your Login is 1234, enter 1234 -> Save
3) Go to Adaptation
4) Enter 01 in “Channel Number”
5) Enter
6) Enter number corresponding to the total number of keys to be matched, The “Stored Value” is the number of keys currently matched. For example, Enter 2 -> Save
7) Switch ignition off and remove key
8) Insert next key to ignition and switch ignition on again. Wait 15 sec. Repeat this step with each key until all keys have been matched.
9) Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation
10) Enter 00 in “Channel Number”
11) Enter 0 and Save. This will learn ECU with Immobiliser.
Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster:
(Golf 2004, Passat B5, B6 )
1) Switch ignition ON with new key.
2) Select: Instrument -> Login: Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).For example, if your Login is 1234, enter 01234 -> Save
3) Go to Adaptation
4) Enter 21 in “Channel Number”
5) Enter
6) Enter number corresponding to the total number of keys to be matched. The “Stored Value” is the number of keys currently matched. For ex, Enter 2 -> Save
7) Switch ignition off and remove key
8) Insert next key to ignition and switch ignition on again. Wait 15 sec. Repeat this step with each key until all keys have been matched.
9) Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation
10) Enter 00 in “Channel Number”
11) Enter 0 and Save. This will learn ECU with Immobiliser..

Be the first to review “T-code T300 Auto Key Programmer – Newest Version V16.8 for Multi-Brand Cars”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

General Inquiries

There are no inquiries yet.

Main Menu

T-code T300 Auto Key Programmer – Newest Version V16.8 for Multi-Brand Cars

T-code T300 Auto Key Programmer – Newest Version V16.8 for Multi-Brand Cars

72,900.00

Add to Cart